$19.95 including 12V Power Supply
The Railsync Power and Termination Board can provide additional Railsync Power, Termination or both to a standard Loconet. It can also provide the required Railsync Power and Termination for a Standalone Loconet.
Command Stations typically have limited Railsync Power capability. When many stationary Loconet devices are attached or if throttles are plugged into unpowered Loconet jacks, then additional Railsync Power may be needed to ensure proper operation.
The Command Station generally provides adequate Termination for the Loconet. Some installations with very long Loconet cable runs and many connected devices occasions may find communication reliability is improved by adding Termination.
A Standalone Loconet (a Loconet with no Command Station) requires a source of both Railsync Power and Termination to function properly.
The Railsync Power and Termination Board comes with an appropriate 12VDC power supply. The Instruction Sheet (see below) describes how to configure the board for specific applications.
Features
- Connects to standard Loconet or a Standalone Loconet
- Optionally provides up to 500 mA of additional Railsync Power
- Optionally provides Loconet Termination